tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcr ystals.com in keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. iso9001: 2000 registered for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com the ACTF8002/864.0/dcc6c is a low-loss, compact, and economical surface-acoustic-wave ( saw ) rf filter in a surface-mount ceramic dcc6c case for wireless audio application. it provides low amplitude ripple and high image frequency suppression. 1.package dimensions (dcc6c) 2. 3.test circuit pin configuration 2 input / output 5 output / input others case ground sign data (unit: mm) sign data (unit: mm) a 0.6 e 1.1 b 1.5 f 3.0 c 1.5 g 3.0 d 1.8 issue : 1.1 c1 date : march 2010
tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcr ystals.com in keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. iso9001: 2000 registered for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com 4. frequency characteristics 5.performance 5-1.maximum ratings rating value units input power level 10 dbm dc voltage 12v vdc storage temperature -40 to +85 c soldering temperature +235 c issue : 1.1 c1 date : march 2010
tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcr ystals.com in keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. iso9001: 2000 registered for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com 5-2.electronic characteristics item specifications nominal center frequency (f c ) 864.000 mhz insertion loss (within f c +/-1.0mhz) 4.5db max. absolute attenuation 1) within 820 ? 823 mhz 2) within 841 ? 844 mhz 3) within 884 ? 887 mhz 4) within 905 ? 908 mhz 40db min. 35db min. 35db min. 40db min. ripple deviation (within f c +/-1.0mhz) 1.5db max. input / output impedance(nominal) 50 icaution: electrostatic sensitive device. observe precautions for handling! 1. the frequency f c is defined as the midpoint between the 3db frequencies. 2. unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 test system with vswr 1.2:1. the test fixture l and c are adjusted for minimum insertion loss at the filter center frequency, f c . note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. unless noted otherwise, specifications apply over the entire specified operating temperature range. 4. the specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. all equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. our liability is only assumed for the surface acoustic wave (saw) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. issue : 1.1 c1 date : march 2010
|
